Manufacturers of Marine and
Industrial Air Conditioners & Chillers

Instruction and Owners Manual, Wiring Diagrams

Installation Instructions follow link

Thermostat Setup follow link

Determining BTUs follow link

Warranty Information follow link

Click here to download a PDF copy of the manual
To download a PDF copy
click on the buttom

Download a PDF copy of the
Split System Manual

Basic Wire Diagrams
Up to 18k BTU

Basic Wire Diagrams/Schematics: 6,000 to 18,000 BTU

Wires labeled "Main Power In" must be connected to the main power in terminal on the unit.

Wires marked "To Water Pump" must be connected to the output line on the power terminal.

Wires marked "To Thermostat" must be connected only to the thermostat.

NOTE: All wires are color-coded. Wires must be connected to corresponding colors. Failure to do so could cause damage to the unit and may void warranty. For Further assistance, contact 1-866-227-7773 or (772) 220-0038

NOTE: FOR ALL 18,500, 20,000 AND 22,000 BTU UNITS 120 VOLT

There must be two 20-amp shore power sources. Power source number one is for the fan, a/c unit and pump in the cooling mode. THIS SOURCE IS ALSO FOR THE FIRST STAGE OF THE HEAT.

Power source number 2 is ONLY FOR THE SECOND STAGE OF THE HEAT. Heat output will be deficient if only one stage of the heat is connected.

Basic Wire Diagrams
18.5k BTU and Up

Wiring Diagram/Schematics for the 18,500 to 36,000 BTU AC unit, with 2 Stage Heat

If you have a 18,500 BTU unit or higher with "2 Stage Heat,"
there is a seperate connection for "Heat Stage 2 Power In."

Air Cooled Chiller Installation

Ocean Breeze

Manufactured by
Quorum Marine & Electronics, Inc.

2951 SE Dominica Terrace
Stuart, Florida 34997

Tel (772) 220-0038
Toll Free (866) 227-7773
Fax (772) 220-0260

Email us at:

Ocean Breeze™/Barco Chillers™/Whisperaire™
are the property of Quorum Marine & Electronics, Inc.

© 2015 Quorum Marine & Electronics, Inc.
Worldwide Rights Reserved